Home Forum Software discussion Kernel vanilla

This topic contains 37 replies, has 8 voices, and was last updated by  alpha_one_x86 3 weeks, 3 days ago.

Viewing 8 posts - 31 through 38 (of 38 total)
  • Author
    Posts
  • #7350

    alpha_one_x86
    Participant

    Hi, I try as I can. I’m looking with tkos.co.il to contact solid run, but solid run not responds to him.
    I need the port 2.5G can work at 1G and full support SFP+ on vanilla.

    I’m able to paid 2000$ on 6000$ requested by tkos.co.il to fix this.

    #7351

    hchenji
    Participant

    I don’t think you should pay them anything to get the SFP+ to work. Since the board was advertised as having 2 SFP+ ports, it is expected that they supply customers with correct working BSP that lets them use the SFP+ ports in all modes.

    Unless they are paying you to solve the problem by writing code, do not pay them anything!

    #7352

    alpha_one_x86
    Participant

    The vanilla kernel support is avised but not working, BSP useless for me (I need modern kernel).

    But you are in right, solid run should fix the support of their hardware.

    #7353

    hchenji
    Participant

    Have you tried with mcbin branch of Russell King’s linux-arm repo? Lots of changes in the last week: http://git.armlinux.org.uk/cgit/linux-arm.git/log/?h=mcbin

    #7354

    hchenji
    Participant

    I cannot boot linux-arm mcbin branch. Any idea what’s wrong??

    
    FreeRTOS 7.3.0 - Marvell cm3 - A8K release armada-18.05.1
    
    OTICE:  Done
    NOTICE:  SCP Image doesn't contain PM firmware
    NOTICE:  BL1: Booting BL31
    lNOTICE:  MSS PM is not supported in this build
    NOTICE:  BL31: v1.5(release):711ecd3 (Marvell-armada-18.09.4)
    NOTICE:  BL31: Built : 17:37:55, Jan 22 2019
    
    U-Boot 2018.03-armada-18.09.1-g8fe4031 (Jan 22 2019 - 17:32:28 -0500)
    
    Model: Marvell Armada 8040 MACCHIATOBin
    SoC: Armada8040-A2; AP806-A1; 2xCP110-A2
    Clock:  CPU     1600 [MHz]
            DDR     1050 [MHz]
            FABRIC  1050 [MHz]
            MSS     200  [MHz]
    LLC Enabled (Exclusive Mode)
    DRAM:  4 GiB
    Comphy chip #0:
    Comphy-0: PEX0         
    Comphy-1: PEX0         
    Comphy-2: PEX0         
    Comphy-3: PEX0         
    Comphy-4: SFI0          10.3125 Gbps
    Comphy-5: SATA1        
    Comphy chip #1:
    Comphy-0: SGMII1        1.25 Gbps 
    Comphy-1: SATA0        
    Comphy-2: USB3_HOST0   
    Comphy-3: SATA1        
    Comphy-4: SFI0          10.3125 Gbps
    Comphy-5: SGMII2        3.125 Gbps
    UTMI PHY 0 initialized to USB Host0
    SATA link 0 timeout.
    SATA link 1 timeout.
    AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
    flags: 64bit ncq led only pmp fbss pio slum part sxs 
    PCIE-0: Link down
    MMC:   sdhci@6e0000: 0, sdhci@780000: 1
    Loading Environment from SPI Flash... Bus spi@700680 CS0 configured for direct access 00000000f9000000:0x1000000
    SF: Detected w25q32bv with page size 256 Bytes, erase size 4 KiB, total 4 MiB
    OK
    Model: Marvell Armada 8040 MACCHIATOBin
    Net:   eth0: mvpp2-0 [PRIME], eth1: mvpp2-3, eth2: mvpp2-4, eth3: mvpp2-5
    Hit any key to stop autoboot:  0 
    switch to partitions #0, OK
    mmc1 is current device
    14383616 bytes read in 13932 ms (1007.8 KiB/s)
    32173 bytes read in 9 ms (3.4 MiB/s)
    ## Flattened Device Tree blob at 06f00000
       Booting using the fdt blob at 0x6f00000
       Using Device Tree in place at 0000000006f00000, end 0000000006f0adac
    
    Starting kernel ...
    
    
    #7355

    alpha_one_x86
    Participant

    Hi,

    Here the boot here, but all SFP and ethernet is down. At least with vanilla the ethernet is up.

    [    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd081]
    [    0.000000] Linux version 4.20.0-g74572ca69681 (root@toc) (gcc version 6.4.0 (Gentoo 6.4.0-r1 p1.3)) #1 SMP PREEMPT Fri Jan 25 02:05:47 -00 2019
    [    0.000000] Machine model: Marvell 8040 MACCHIATOBin Single-shot
    [    0.000000] efi: Getting EFI parameters from FDT:
    [    0.000000] efi: UEFI not found.
    [    0.000000] cma: Reserved 64 MiB at 0x00000000bc000000
    [    0.000000] On node 0 totalpages: 1048064
    [    0.000000]   DMA32 zone: 12280 pages used for memmap
    [    0.000000]   DMA32 zone: 0 pages reserved
    [    0.000000]   DMA32 zone: 785920 pages, LIFO batch:63
    [    0.000000]   Normal zone: 4096 pages used for memmap
    [    0.000000]   Normal zone: 262144 pages, LIFO batch:63
    [    0.000000] psci: probing for conduit method from DT.
    [    0.000000] psci: PSCIv1.0 detected in firmware.
    [    0.000000] psci: Using standard PSCI v0.2 function IDs
    [    0.000000] psci: MIGRATE_INFO_TYPE not supported.
    [    0.000000] psci: SMC Calling Convention v1.0
    [    0.000000] random: get_random_bytes called from start_kernel+0xac/0x400 with crng_init=0
    [    0.000000] percpu: Embedded 22 pages/cpu @(____ptrval____) s52952 r8192 d28968 u90112
    [    0.000000] pcpu-alloc: s52952 r8192 d28968 u90112 alloc=22*4096
    [    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
    [    0.000000] Detected PIPT I-cache on CPU0
    [    0.000000] CPU features: enabling workaround for EL2 vector hardening
    [    0.000000] CPU features: detected: Kernel page table isolation (KPTI)
    [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 1031688
    [    0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mmcblk1p2 rw rootwait
    [    0.000000] printk: log_buf_len individual max cpu contribution: 4096 bytes
    [    0.000000] printk: log_buf_len total cpu_extra contributions: 12288 bytes
    [    0.000000] printk: log_buf_len min size: 16384 bytes
    [    0.000000] printk: log_buf_len: 32768 bytes
    [    0.000000] printk: early log buf free: 14428(88%)
    [    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    [    0.000000] software IO TLB: mapped [mem 0xb7fff000-0xbbfff000] (64MB)
    [    0.000000] Memory: 3973968K/4192256K available (9980K kernel code, 618K rwdata, 2848K rodata, 576K init, 272K bss, 152752K reserved, 65536K cma-reserved)
    [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    [    0.000000] rcu: Preemptible hierarchical RCU implementation.
    [    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
    [    0.000000]  Tasks RCU enabled.
    [    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
    [    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
    [    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
    [    0.000000] GIC: Adjusting CPU interface base to 0x00000000f022f000
    [    0.000000] GIC: Using split EOI/Deactivate mode
    [    0.000000] GICv2m: DT overriding V2M MSI_TYPER (base:160, num:32)
    [    0.000000] GICv2m: range[mem 0xf0280000-0xf0280fff], SPI[160:191]
    [    0.000000] GICv2m: DT overriding V2M MSI_TYPER (base:192, num:32)
    [    0.000000] GICv2m: range[mem 0xf0290000-0xf0290fff], SPI[192:223]
    [    0.000000] GICv2m: DT overriding V2M MSI_TYPER (base:224, num:32)
    [    0.000000] GICv2m: range[mem 0xf02a0000-0xf02a0fff], SPI[224:255]
    [    0.000000] GICv2m: DT overriding V2M MSI_TYPER (base:256, num:32)
    [    0.000000] GICv2m: range[mem 0xf02b0000-0xf02b0fff], SPI[256:287]
    [    0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (phys).
    [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns
    [    0.000002] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns
    [    0.000131] Console: colour dummy device 80x25
    [    0.000151] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=100000)
    [    0.000156] pid_max: default: 32768 minimum: 301
    [    0.000192] LSM: Security Framework initializing
    [    0.000225] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
    [    0.000242] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
    [    0.024004] ASID allocator initialised with 32768 entries
    [    0.032003] rcu: Hierarchical SRCU implementation.
    [    0.040133] EFI services will not be available.
    [    0.048018] smp: Bringing up secondary CPUs ...
    [    0.080191] Detected PIPT I-cache on CPU1
    [    0.080219] CPU1: Booted secondary processor 0x0000000001 [0x410fd081]
    [    0.112211] Detected PIPT I-cache on CPU2
    [    0.112234] CPU2: Booted secondary processor 0x0000000100 [0x410fd081]
    [    0.144236] Detected PIPT I-cache on CPU3
    [    0.144253] CPU3: Booted secondary processor 0x0000000101 [0x410fd081]
    [    0.144290] smp: Brought up 1 node, 4 CPUs
    [    0.144301] SMP: Total of 4 processors activated.
    [    0.144306] CPU features: detected: 32-bit EL0 Support
    [    0.144309] CPU features: detected: CRC32 instructions
    [    0.146257] CPU: All CPU(s) started at EL2
    [    0.146269] alternatives: patching kernel code
    [    0.146655] devtmpfs: initialized
    [    0.148615] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
    [    0.148623] futex hash table entries: 1024 (order: 4, 65536 bytes)
    [    0.149169] xor: measuring software checksum speed
    [    0.188146]    8regs     :  6858.000 MB/sec
    [    0.228167]    8regs_prefetch:  5956.000 MB/sec
    [    0.268191]    32regs    :  7542.000 MB/sec
    [    0.308213]    32regs_prefetch:  6298.000 MB/sec
    [    0.308216] xor: using function: 32regs (7542.000 MB/sec)
    [    0.308223] pinctrl core: initialized pinctrl subsystem
    [    0.308577] DMI not present or invalid.
    [    0.308711] NET: Registered protocol family 16
    [    0.308853] audit: initializing netlink subsys (disabled)
    [    0.308907] audit: type=2000 audit(0.308:1): state=initialized audit_enabled=0 res=1
    [    0.309239] cpuidle: using governor ladder
    [    0.309262] cpuidle: using governor menu
    [    0.309349] vdso: 2 pages (1 code @ (____ptrval____), 1 data @ (____ptrval____))
    [    0.309355] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
    [    0.309786] DMA: preallocated 256 KiB pool for atomic allocations
    [    0.309837] Serial: AMBA PL011 UART driver
    [    0.318384] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
    [    0.318564] cryptd: max_cpu_qlen set to 1000
    [    0.384353] raid6: int64x1  gen()  1053 MB/s
    [    0.452371] raid6: int64x1  xor()   895 MB/s
    [    0.520436] raid6: int64x2  gen()  1403 MB/s
    [    0.588474] raid6: int64x2  xor()  1302 MB/s
    [    0.656479] raid6: int64x4  gen()  2010 MB/s
    [    0.724535] raid6: int64x4  xor()  1448 MB/s
    [    0.792581] raid6: int64x8  gen()  2406 MB/s
    [    0.860606] raid6: int64x8  xor()  1382 MB/s
    [    0.928644] raid6: neonx1   gen()  2119 MB/s
    [    0.996698] raid6: neonx1   xor()  2231 MB/s
    [    1.064728] raid6: neonx2   gen()  2802 MB/s
    [    1.132777] raid6: neonx2   xor()  2882 MB/s
    [    1.200815] raid6: neonx4   gen()  3546 MB/s
    [    1.268853] raid6: neonx4   xor()  3275 MB/s
    [    1.336891] raid6: neonx8   gen()  4127 MB/s
    [    1.404940] raid6: neonx8   xor()  3408 MB/s
    [    1.404943] raid6: using algorithm neonx8 gen() 4127 MB/s
    [    1.404946] raid6: .... xor() 3408 MB/s, rmw enabled
    [    1.404949] raid6: using neon recovery algorithm
    [    1.405438] vgaarb: loaded
    [    1.405536] SCSI subsystem initialized
    [    1.405624] libata version 3.00 loaded.
    [    1.405718] usbcore: registered new interface driver usbfs
    [    1.405738] usbcore: registered new interface driver hub
    [    1.405768] usbcore: registered new device driver usb
    [    1.406021] pps_core: LinuxPPS API ver. 1 registered
    [    1.406025] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
    [    1.406036] PTP clock support registered
    [    1.406471] clocksource: Switched to clocksource arch_sys_counter
    [    1.406515] VFS: Disk quotas dquot_6.6.0
    [    1.406539] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [    1.409899] NET: Registered protocol family 2
    [    1.410102] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes)
    [    1.410117] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
    [    1.410196] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
    [    1.410367] TCP: Hash tables configured (established 32768 bind 32768)
    [    1.410434] UDP hash table entries: 2048 (order: 4, 65536 bytes)
    [    1.410452] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
    [    1.410549] NET: Registered protocol family 1
    [    1.410723] RPC: Registered named UNIX socket transport module.
    [    1.410728] RPC: Registered udp transport module.
    [    1.410731] RPC: Registered tcp transport module.
    [    1.410734] RPC: Registered tcp NFSv4.1 backchannel transport module.
    [    1.410740] PCI: CLS 0 bytes, default 64
    [    1.410984] hw perfevents: unable to count PMU IRQs
    [    1.410991] hw perfevents: /ap806/config-space@f0000000/pmu: failed to register PMU devices!
    [    1.414912] workingset: timestamp_bits=46 max_order=20 bucket_order=0
    [    1.417927] NFS: Registering the id_resolver key type
    [    1.417941] Key type id_resolver registered
    [    1.417944] Key type id_legacy registered
    [    1.417950] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
    [    1.417993] jffs2: version 2.2. (NAND) \xc2\xa9 2001-2006 Red Hat, Inc.
    [    1.418223] fuse init (API version 7.28)
    [    1.420981] async_tx: api initialized (async)
    [    1.420994] io scheduler noop registered
    [    1.421062] io scheduler cfq registered (default)
    [    1.421066] io scheduler mq-deadline registered
    [    1.421069] io scheduler kyber registered
    [    1.422587] (NULL device *): Failed to create dummy-system-controller@440000 debugfs directory
    [    1.423092] armada-ap806-pinctrl f06f4000.system-controller:pinctrl: registered pinctrl driver
    [    1.423389] armada-cp110-pinctrl f2440000.system-controller:pinctrl: registered pinctrl driver
    [    1.423581] armada-cp110-pinctrl f4440000.system-controller:pinctrl: registered pinctrl driver
    [    1.426102] mv_xor_v2 f0400000.xor: Marvell Version 2 XOR driver
    [    1.426362] mv_xor_v2 f0420000.xor: Marvell Version 2 XOR driver
    [    1.426644] mv_xor_v2 f0440000.xor: Marvell Version 2 XOR driver
    [    1.426877] mv_xor_v2 f0460000.xor: Marvell Version 2 XOR driver
    [    1.427162] mv_xor_v2 f26a0000.xor: Marvell Version 2 XOR driver
    [    1.427408] mv_xor_v2 f26c0000.xor: Marvell Version 2 XOR driver
    [    1.427744] mv_xor_v2 f46a0000.xor: Marvell Version 2 XOR driver
    [    1.427985] mv_xor_v2 f46c0000.xor: Marvell Version 2 XOR driver
    [    1.429203] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [    1.429775] printk: console [ttyS0] disabled
    [    1.450145] f0512000.serial: ttyS0 at MMIO 0xf0512000 (irq = 8, base_baud = 12500000) is a 16550A
    [    2.371845] printk: console [ttyS0] enabled
    [    2.396790] f2702100.serial: ttyS1 at MMIO 0xf2702100 (irq = 27, base_baud = 15625000) is a 16550A
    [    2.426464] f4702000.serial: ttyS2 at MMIO 0xf4702000 (irq = 28, base_baud = 15625000) is a 16550A
    [    2.436161] omap_rng f2760000.trng: Random Number Generator ver. 203b34c
    [    2.442992] omap_rng f4760000.trng: Random Number Generator ver. 203b34c
    [    2.449925] cacheinfo: Unable to detect cache hierarchy for CPU 0
    [    2.456359] brd: module loaded
    [    2.461876] loop: module loaded
    [    2.465694] ahci f2540000.sata: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl platform mode
    [    2.474280] ahci f2540000.sata: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs 
    [    2.482918] scsi host0: ahci
    [    2.485990] scsi host1: ahci
    [    2.488961] ata1: SATA max UDMA/133 mmio [mem 0xf2540000-0xf256ffff] port 0x100 irq 31
    [    2.496919] ata2: SATA max UDMA/133 mmio [mem 0xf2540000-0xf256ffff] port 0x180 irq 31
    [    2.505088] ahci f4540000.sata: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl platform mode
    [    2.513664] ahci f4540000.sata: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs 
    [    2.522344] scsi host2: ahci
    [    2.525392] scsi host3: ahci
    [    2.528360] ata3: SATA max UDMA/133 mmio [mem 0xf4540000-0xf456ffff] port 0x100 irq 32
    [    2.536316] ata4: SATA max UDMA/133 mmio [mem 0xf4540000-0xf456ffff] port 0x180 irq 32
    [    2.545169] m25p80 spi4.0: w25q32 (4096 Kbytes)
    [    2.550256] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
    [    2.557856] libphy: Fixed MDIO Bus: probed
    [    2.562139] tun: Universal TUN/TAP device driver, 1.6
    [    2.567450] libphy: orion_mdio_bus: probed
    [    2.572134] sky2: driver version 1.30
    [    2.575984] VFIO - User Level meta-driver version: 0.3
    [    2.581422] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [    2.587985] ehci-pci: EHCI PCI platform driver
    [    2.592466] ehci-platform: EHCI generic platform driver
    [    2.597788] ehci-orion: EHCI orion driver
    [    2.601876] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [    2.608091] ohci-pci: OHCI PCI platform driver
    [    2.612573] ohci-platform: OHCI generic platform driver
    [    2.618094] xhci-hcd f2500000.usb3: xHCI Host Controller
    [    2.623442] xhci-hcd f2500000.usb3: new USB bus registered, assigned bus number 1
    [    2.631168] xhci-hcd f2500000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x0000000000010010
    [    2.640451] xhci-hcd f2500000.usb3: irq 33, io mem 0xf2500000
    [    2.646537] hub 1-0:1.0: USB hub found
    [    2.650311] hub 1-0:1.0: 1 port detected
    [    2.654368] xhci-hcd f2500000.usb3: xHCI Host Controller
    [    2.659713] xhci-hcd f2500000.usb3: new USB bus registered, assigned bus number 2
    [    2.667236] xhci-hcd f2500000.usb3: Host supports USB 3.0  SuperSpeed
    [    2.673727] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
    [    2.682029] hub 2-0:1.0: USB hub found
    [    2.685808] hub 2-0:1.0: 1 port detected
    [    2.689990] xhci-hcd f2510000.usb3: xHCI Host Controller
    [    2.695337] xhci-hcd f2510000.usb3: new USB bus registered, assigned bus number 3
    [    2.703044] xhci-hcd f2510000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x0000000000010010
    [    2.712324] xhci-hcd f2510000.usb3: irq 34, io mem 0xf2510000
    [    2.718345] hub 3-0:1.0: USB hub found
    [    2.722131] hub 3-0:1.0: 1 port detected
    [    2.726176] xhci-hcd f2510000.usb3: xHCI Host Controller
    [    2.731519] xhci-hcd f2510000.usb3: new USB bus registered, assigned bus number 4
    [    2.739039] xhci-hcd f2510000.usb3: Host supports USB 3.0  SuperSpeed
    [    2.745535] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
    [    2.753849] hub 4-0:1.0: USB hub found
    [    2.757659] hub 4-0:1.0: 1 port detected
    [    2.761991] usbcore: registered new interface driver usb-storage
    [    2.768200] mousedev: PS/2 mouse device common for all mice
    [    2.774010] armada38x-rtc f4284000.rtc: registered as rtc0
    [    2.779605] i2c /dev entries driver
    [    2.785067] (NULL device *): Failed to create dummy-system-controller@400000 debugfs directory
    [    2.794764] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
    [    2.803479] sdhci: Secure Digital Host Controller Interface driver
    [    2.809689] sdhci: Copyright(c) Pierre Ossman
    [    2.814065] sdhci-pltfm: SDHCI platform and OF driver helper
    [    2.819888] xenon-sdhci f06e0000.sdhci: Linked as a consumer to regulator.2
    [    2.820645] ata1: SATA link down (SStatus 0 SControl 300)
    [    2.832344] ata2: SATA link down (SStatus 0 SControl 300)
    [    2.850503] mmc0: SDHCI controller on f06e0000.sdhci [f06e0000.sdhci] using ADMA 64-bit
    [    2.855599] ata3: SATA link down (SStatus 0 SControl 300)
    [    2.858803] xenon-sdhci f2780000.sdhci: Linked as a consumer to regulator.1
    [    2.864030] ata4: SATA link down (SStatus 0 SControl 300)
    [    2.901821] mmc1: SDHCI controller on f2780000.sdhci [f2780000.sdhci] using ADMA 64-bit
    [    2.910072] ledtrig-cpu: registered to indicate activity on CPUs
    [    2.916392] usbcore: registered new interface driver usbhid
    [    2.922002] usbhid: USB HID core driver
    [    2.926396] ipip: IPv4 and MPLS over IPv4 tunneling driver
    [    2.932126] gre: GRE over IPv4 demultiplexor driver
    [    2.937042] ip_gre: GRE over IPv4 tunneling driver
    [    2.942609] NET: Registered protocol family 10
    [    2.948057] Segment Routing with IPv6
    [    2.952046] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
    [    2.958364] ip6_gre: GRE over IPv6 tunneling driver
    [    2.963474] NET: Registered protocol family 17
    [    2.968218] 8021q: 802.1Q VLAN Support v1.8
    [    2.972454] Key type dns_resolver registered
    [    2.976756] mpls_gso: MPLS GSO support
    [    2.980819] registered taskstats version 1
    [    2.981130] mmc0: new high speed MMC card at address 0001
    [    2.990399] Btrfs loaded, crc32c=crc32c-generic
    [    2.990776] mmcblk0: mmc0:0001 8GME4R 7.28 GiB 
    [    2.996581] usb_phy_generic usb3_phy0: Linked as a consumer to regulator.3
    [    2.999810] mmcblk0boot0: mmc0:0001 8GME4R partition 1 4.00 MiB
    [    3.012452] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
    [    3.012699] mmcblk0boot1: mmc0:0001 8GME4R partition 2 4.00 MiB
    [    3.020959] armada8k-pcie f2600000.pcie: host bridge /cp0/pcie@f2600000 ranges:
    [    3.026691] mmcblk0rpmb: mmc0:0001 8GME4R partition 3 512 KiB, chardev (245:0)
    [    3.033994] armada8k-pcie f2600000.pcie:    IO 0xf9000000..0xf900ffff -> 0xf9000000
    [    3.049054] armada8k-pcie f2600000.pcie:   MEM 0xf6000000..0xf6efffff -> 0xf6000000
    [    3.056776] mmc1: new high speed SDHC card at address aaaa
    [    3.062662] mmcblk1: mmc1:aaaa SC16G 14.8 GiB 
    [    3.075495]  mmcblk1: p1 p2
    [    4.067259] armada8k-pcie f2600000.pcie: Phy link never came up
    [    4.073215] armada8k-pcie f2600000.pcie: Link not up after reconfiguration
    [    4.080179] armada8k-pcie f2600000.pcie: PCI host bridge to bus 0000:00
    [    4.086829] pci_bus 0000:00: root bus resource [bus 00-ff]
    [    4.092343] pci_bus 0000:00: root bus resource [io  0x0000-0xffff] (bus address [0xf9000000-0xf900ffff])
    [    4.101866] pci_bus 0000:00: root bus resource [mem 0xf6000000-0xf6efffff]
    [    4.108786] pci 0000:00:00.0: [11ab:0110] type 01 class 0x060400
    [    4.108805] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x000fffff 64bit]
    [    4.108844] pci 0000:00:00.0: supports D1 D2
    [    4.108847] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
    [    4.110482] pci 0000:00:00.0: BAR 0: assigned [mem 0xf6000000-0xf60fffff 64bit]
    [    4.117833] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
    [    4.430498] pcieport 0000:00:00.0: Signaling PME with IRQ 41
    [    4.436287] aer 0000:00:00.0:pcie002: AER enabled with IRQ 41
    [    4.442619] xhci-hcd f4500000.usb3: xHCI Host Controller
    [    4.447973] xhci-hcd f4500000.usb3: new USB bus registered, assigned bus number 5
    [    4.455704] xhci-hcd f4500000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x0000000000010010
    [    4.464985] xhci-hcd f4500000.usb3: irq 35, io mem 0xf4500000
    [    4.471060] hub 5-0:1.0: USB hub found
    [    4.474841] hub 5-0:1.0: 1 port detected
    [    4.478894] xhci-hcd f4500000.usb3: xHCI Host Controller
    [    4.484237] xhci-hcd f4500000.usb3: new USB bus registered, assigned bus number 6
    [    4.491757] xhci-hcd f4500000.usb3: Host supports USB 3.0  SuperSpeed
    [    4.498250] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
    [    4.506564] hub 6-0:1.0: USB hub found
    [    4.510340] hub 6-0:1.0: 1 port detected
    [    4.515101] armada38x-rtc f4284000.rtc: setting system clock to 2019-01-25 12:28:05 UTC (1548419285)
    [    4.524573] md: Waiting for all devices to be available before autodetect
    [    4.531395] md: If you don't use raid, use raid=noautodetect
    [    4.537286] md: Autodetecting RAID arrays.
    [    4.541407] md: autorun ...
    [    4.544224] md: ... autorun DONE.
    [    4.555527] EXT4-fs (mmcblk1p2): mounting ext3 file system using the ext4 subsystem
    [    4.651889] random: fast init done
    [    4.719462] EXT4-fs (mmcblk1p2): recovery complete
    [    4.725068] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null)
    [    4.733216] VFS: Mounted root (ext3 filesystem) on device 179:26.
    [    4.748181] devtmpfs: mounted
    [    4.751350] Freeing unused kernel memory: 576K
    [    4.774535] Run /sbin/init as init process
    [    5.832186] random: lvm: uninitialized urandom read (4 bytes read)
    [    6.934031] udevd[1813]: starting version 3.2.5
    [    6.942070] random: udevd: uninitialized urandom read (16 bytes read)
    [    6.943493] random: udevd: uninitialized urandom read (16 bytes read)
    [    6.943512] random: udevd: uninitialized urandom read (16 bytes read)
    [    6.956435] udevd[1814]: starting eudev-3.2.5
    [    8.328159] urandom_read: 5 callbacks suppressed
    [    8.328162] random: ln: uninitialized urandom read (6 bytes read)
    [    9.120161] bpfilter: Loaded bpfilter_umh pid 2457 
    
    #7356

    hchenji
    Participant

    Can you share your .config for linux-arm and also uboot printenv output if possible? I cannot figure out why my build doesn’t boot.

    #7357

    alpha_one_x86
    Participant

    Check if this is enabled:
    CONFIG_MDIO_I2C
    CONFIG_MVMDIO
    CONFIG_OF_MDIO
    CONFIG_PHY_MVEBU_CP110_COMPHY
    CONFIG_MVPP2
    CONFIG_SFP
    CONFIG_MARVELL_10G
    My config:
    https://pastebin.com/CaT458Ac

Viewing 8 posts - 31 through 38 (of 38 total)

You must be logged in to reply to this topic.

Technical specification tables can not be displayed on mobile. Please view on desktop