Home › Forums › Getting Started › Recover uboot from UART
This topic contains 2 replies, has 2 voices, and was last updated by xg 3 weeks, 6 days ago.
Big mistake by erasing uboot flash by mistake. Can I recover it from UART?
BootROM – 2.03
Warning: IHB ID assinment ACK not done 0x00020002
h 1 (0x32)
Error: no valid header till end of media
Error: Failed boot attempt 04. error = 0x018
I have succeeded to boot u-boot from UART.
But it is easier and faster and stabler to boot from a SDHC card than to boot from UART.
(If that isn’t at far place from you and a SD slot is not broken.)
Notice: A legacy SD card(< 4GB) may not be usable.
Used similar steps and uboot is recovered now.
You must be logged in to reply to this topic.
Technical specification tables can not be displayed on mobile. Please view on desktop