Home Forum Getting Started Self-hosted u-boot build?

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
  • #373

    Hello, how can one get the native arm64 binaries of the proprietary tools found under tools/marvell (e.g. doimage) in branch u-boot-2015.01-armada-17.04 of https://github.com/MarvellEmbeddedProcessors/u-boot-marvell ? As of now, a self-hosted build of u-boot is not possible.


    That’s there.

    I can build u-boot-2015.01-armada-17.04
    $ make DTC=dtc -j4
    and ATF.

    I used prebuild kernel for mcbin 4.4.8-armada-17.02.2-g4126e30
    and rootfs for raspi3 devuan_jessie_1.0.0_arm64_raspi3.img

    BootROM – 2.03
    Starting CP-0 IOROM 1.07
    Booting from SD 0 (0x29)
    Found valid image at boot postion 0x000
    lNOTICE: Starting binary extension
    NOTICE: Gathering DRAM information
    mv_ddr: mv_ddr-devel-17.04.0-gf0fda76-dirty (Jun 11 2017 – 04:39:01)
    mv_ddr: completed successfully
    NOTICE: Booting Trusted Firmware
    NOTICE: BL1: v1.3(release):devel-17.04.0:80316c8
    NOTICE: BL1: Built : 04:39:05, Jun 11 2017
    NOTICE: BL1: Booting BL2
    lNOTICE: BL2: v1.3(release):devel-17.04.0:80316c8
    NOTICE: BL2: Built : 04:39:05, Jun 11 2017
    NOTICE: BL1: Booting BL31
    lNOTICE: BL31: v1.3(release):devel-17.04.0:80316c8
    NOTICE: BL31: Built : 04:39:05, Jun 11 2017

    U-Boot 2015.01-devel-17.04.1 (Jun 11 2017 – 04:24:47)


    Oh, so it was in another repo. Thanks for the tip, nanasi!

Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.

Technical specification tables can not be displayed on mobile. Please view on desktop