UART boot problem for marvell 7040 board

Home › Forum › Software discussion › UART boot problem for marvell 7040 board

Tagged: 

This topic contains 1 reply, has 2 voices, and was last updated by  nanasi 1 week, 4 days ago.

Log In Register Lost Password
Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • July 9, 2019 at 7:26 am #7798

    Rohan Kumar
    Participant

    BootROM – 2.03
    Starting CP-0 IOROM 1.07
    Booting from SPI NOR flash 1 (0x32)
    Error: no valid header till end of media
    Error: Failed boot attempt 04. error = 0x018

    Trying Uart..

    July 10, 2019 at 5:25 pm #7809

    nanasi
    Participant

    SolidRun’s KB for 8040:
    Booting the board using UART xmodem

  • Author
    Posts
Log In Register Lost Password
Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.

Technical specification tables can not be displayed on mobile. Please view on desktop